Last Modified: 11-29-2007 1.6 G
Service Category: Engine/Hybrid System Section: Engine Control
Model Year: 2008 Model: Sequoia Doc ID: RM000002ZKR003X
Title: 2UZ-FE ENGINE CONTROL: CAMSHAFT POSITION SENSOR: INSPECTION (2008 Sequoia)

INSPECTION

1. INSPECT VVT SENSOR

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 - 2

Cold

835 to 1400 Ω

1 - 2

Hot

1060 to 1645 Ω

HINT:

In the table above, the terms "cold" and "hot" refer to the temperature of the sensor. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).

If the resistance is not as specified, replace the VVT sensor.